Announcement

Collapse
No announcement yet.

High_octane3541's MkV GTI

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • High_octane3541's MkV GTI

    I think this is everything I've done:

    Precision 5858
    FFE tubular manifold
    Tail wg
    Tial bov
    Custom 4" intake
    Custom downpipe
    Apr intercooler
    Fluidampr
    Mishimoto radiator
    IE valve cover
    IE intake manifold
    Neukin catch can
    Eboost2 ebc
    Aquatec meth pump
    4 DO2 nozzles (direct port)
    AFX a/f gauge
    Gruvenparts alternator/tensioner pulley
    Eurodyne Maestro ecu


    RS4 injectors
    RS4 rail valve
    TTRS lpfp
    Torqbyte PM3
    Torqbyte CM5
    IE hpfp


    BSH engine/trans/dogbone mounts
    HPA lower subframe mount
    034 upper subframe mount
    MFactory coilovers
    MFactory adjustable swaybar links
    Hotchkis front/rear swaybar
    Whiteline control arm bushings

    Peloquin LSD
    Eurodyne TCU software

    Bored +1mm (83.5mm)
    IE billet main caps
    IE rods
    IE billet timing gear
    JE pistons 9.5:1
    ARP main studs
    Balanced crank

    Ferrea intake/exhaust valves
    IE springs and retainers
    IE adjustable cam gear
    ARP cam tower bolts
    ARP head studs

    AC delete and most of the interior has been removed







    Car made 469whp 423wtq on cobbs mustang dyno. Not sure how accurate the numbers were because I was spinning the tires while on the dyno.

    Currently working on installing a 5th injector and should have that done in a week or two 👍🏼




    Last edited by High_octane3541; 06-25-2016, 01:20 PM.

  • #2
    Originally posted by High_octane3541 View Post
    Car made 469whp 423wtq on cobbs mustang dyno. Not sure how accurate the numbers were because I was spinning the tires while on the dyno.
    Goddamn dude... that's impressive, especially on a mustang dyno.

    and that intake manifold is just fucking beautiful. Whole car is but that engine bay is something else.
    MKV GTI K04

    Comment


    • #3
      I shared you post on the book of faces sick as always James.
      / Audi TT / Yesteryear- MK5 Jetta, MK1 Caddy 16v, MK1 Rabbit, 87 Fox Wagon, MK4 GTI VR6 , 89 Fox Sedan, 87 Scirocco

      Comment


      • #4
        Originally posted by Banky
        I shared you post on the book of faces sick as always James.
        Lol Thanksss

        Comment


        • #5
          Injector addition welded on. Will give it a little paint tomorrow

          Comment


          • #6
            this only gets better and better, so educate me a little bit. How much gains do you get by having another injector? Are you using it for additional fuel? or is this for a fancy meth system?
            / Audi TT / Yesteryear- MK5 Jetta, MK1 Caddy 16v, MK1 Rabbit, 87 Fox Wagon, MK4 GTI VR6 , 89 Fox Sedan, 87 Scirocco

            Comment


            • #7
              Originally posted by Banky
              this only gets better and better, so educate me a little bit. How much gains do you get by having another injector? Are you using it for additional fuel? or is this for a fancy meth system?
              I've maxed out these RS4 injectors and nobody makes anything bigger for the FSI. so the only option is to add additional injectors.

              The additional injector will keep it from going lean in the higher RPMs so I can add more boost (currently on 30psi)

              My tuner and the owner of Eurodyne added a 5th injector to their cars and they were able to gain an additional 50+whp. I think my tuner was running his car at 35-37psi.

              Tuning will be a little time consuming though since I'll have to run a ton of logs to determine at what rpm/boost and how much duty% for the extra injector. After I dial in my injector map I'll send my ecu file to my tuner to see if anything else needs tweaking.

              Comment


              • #8
                Thank you for the detailed response That is some heavy duty work dude. Very cool. I wouldn't expect any less from you though lol
                / Audi TT / Yesteryear- MK5 Jetta, MK1 Caddy 16v, MK1 Rabbit, 87 Fox Wagon, MK4 GTI VR6 , 89 Fox Sedan, 87 Scirocco

                Comment


                • #9
                  Injector came in today





                  Got my fuel lines situated







                  Just gotta do the wiring 👍🏼



                  Comment

                  Working...
                  X